64 ESI-32 Operation Manual
4. Select the drive to be locked or unlocked, then press ENTER.
5. Select whether lock is on or off, then press ENTER.
6. Select the bank to be locked or unlocked, then press ENTER.
The display will show the current bank and its lock status, whether
on or off.
LOCK BANK: off
D1 Selected Drive
B00 Current Bank
Select a Bank
7. Select whether lock is on or off, then press ENTER. The ESI-32
will return to the Module Identifier.
5. Disk Status
This function displays the amount of space that is available on a hard
disk drive and if the drive is locked or not. For floppy disks, this func-
tion indicates if it is a software disk, the name and number of a bank
disk, or if the disk is blank.
1. Activate Master/Global module.
2. Select 7. Disk Utilities, 5. Disk Status (7/5).
3. Select a drive, then press ENTER. If selecting the floppy drive,
insert a disk before pressing ENTER.
DISK STATUS
D0 Floppy Drive
Select a Drive
4. One of the following displays will appear:
DISK STATUS
D1 Main Drive
Avail: 20.7% 8.49Mb
88 Banks Unlocked
DISK STATUS
D0 Floppy Drive
Floppy Disk is Blank
To Next Page
Loading...
