Master/Global 67
Option #9 allows you to perform a low level format on a "virgin" optical
platter (of the Sony type only). Most optical disks that you buy will
already have this low level formatting, but some don't and will not be
recognized by the ESI-32. This utility allows you to perform the func-
tion. This takes about 25 minutes, so don't do it unless absolutely
necessary.
7. Backup
This module allows you to backup and restore a portion or the entire
contents of the hard disk. This function makes it so easy that you really
will have no excuse for not backing up all your hard disk banks. If you'd
hate to lose it, BACK IT UP.
To Backup to another Hard Disk:
1. When the display asks you for the source drive (from), select
the disk drive to be backed-up, then press ENTER.
BACKUP from
D0 Main Drive
Select a Drive
2. The display asks you for the destination drive (into). Select the
disk drive to which the information will be saved, then press
ENTER.
BACKUP into
D0 Main Drive
D1 Removable Media
Select a Drive
3. Select between Automatic or Interactive backup modes.
BACKUP from
D0 Main Drive
D1 Removable Media
Mode: Interactive
• Automatic Mode: transfers the complete contents of the source hard
disk (or just the updated banks) to the destination drive without
prompting you at each bank.
• Interactive Mode: transfers the banks of the source hard disk drive
to the destination drive, but prompts you to select each source and
destination bank.
! Caution:
In order to use the backup
function, BOTH drives must be unlocked.
! Caution:
A disk drive cannot be backed-
up to itself.
To Next Page
Loading...
