E-stim 2B - Factory Reset

Factory Reset
A number of settings are retained when your 2B unit is switched off. To clear these
settings select the factory reset option.
Commander
P
u
l
s
e
5
0
:
5
0
A
:
O
F
F
~
L
ÿ
B
:
O
F
F
Commander™ is our PC/Mac control system for the 2B. in conjunction with our Digital
link interface you can control the functions of the 2B directly from your PC. For more
details of Commander visit http://www.e-stim.co.uk/commander/. If Commander is
active then you should see a small arrow ‘~’on the screen. To switch Commander on
and off, simply select Commander mode and use the adjust knob to select ON or OFF.
If Commander is switched on, and you switch your 2B off, Commander will still be
active when the 2B is switched on again.
System Info
When you first turn your 2B unit on it will perform a self test/start up routine.
15