E-stim 2B - Program Modes; Pulse Mode; Bounce Mode; Continuous Mode

Program Modes
The 2B offers a number of program modes. Each mode is designed to offer something
different, but all are controlled by the rotary controls on the front panel.
Pulse Mode
P
U
l
s
e
5
0
:
8
0
A
:
M
A
X
L
B
:
O
F
F
In pulse mode both of the outputs pulse on and off together. The adjustment control
allows the user to adjust the pulse rate (how quickly they pulse on and off) and is
adjustable from 2 to 100. Higher numbers indicate a faster pulse rate. The second value
on the display, is the pulse feel, this allows you to adjust the sensation of each individual
pulse, from soft to spiky, with values from 1 to 100.
Bounce Mode
B
o
u
n
c
e
5
0
:
7
3
A
:
M
A
X
L
B
:
O
F
F
Bounce mode is so named because the outputs ‘bounce’ from channel to channel.
The outputs pulse alternately. The adjustment control allows the user to adjust the pulse
rate from 2 to 100. Higher numbers indicate a faster pulse rate. As with the pulse mode
the second value on the display, is the pulse feel, this allows you to adjust the sensation
of each individual pulse, from soft to spiky, with values from 1 to 100.
Channel A is on when channel B is off and visa versa.
Continuous Mode
C
o
n
t
i
n
u
o
u
s
1
8
A
:
M
A
X
L
B
:
O
F
F
Both of the outputs are on continuously. The ADJUST control adjusts the feel of the
output, this allows you to adjust the sensation of each individual pulse, from soft to
spiky, with values from 2 to 100.
A & B Split Modes
A
S
p
l
i
t
5
0
:
6
6
A
:
7
8
%
L
B
:
7
3
%
The outputs are split between Pulse and Continuous. In A split mode Channel A output
is pulsed, Channel B is continuous. In B Split mode Channel B is pulsed and channel A is
continuous. The adjustment control allows the user to adjust the pulse rate from 2 to
100, with low numbers indicating a slow pulse. The second value, is the pulse feel, that
allows you to adjust the sensation of each individual, from soft to spiky, with values from
1 to 100.
16