The output level increases from 0% to the selected limit and then drops back to 0% The
adjustment control controls how fast the level goes up or down, with values from 2 to
100. The second value, is the pulse feel, that allows you to adjust the sensation of the
pulse stream, from soft to spiky, with values from 1 to 100. With different values for the
left and right channels levels, it is possibly to adjust the synchronicity of the outputs, with
one channel rising and dropping faster than the other.
Waterfall Mode
The output level increases from 0% to the selected limit but instead of dropping straight
back to zero, the outputs slowly decrease to 0% before increasing again. The
adjustment control controls how fast the level goes up or down with values from 2 to
100. The second value, is the pulse feel, that allows you to adjust the sensation of the
pulse stream, from soft to spiky, with values from 1 to 100. With different values for the
left and right channels levels, it is possibly to adjust the synchronicity of the outputs, with
one channel rising and dropping faster than the other.
Squeeze Mode
The pulse rate increases and then drops to nearly continuous producing a synchronised
‘squeeze’ sensation. Both Channel A and Channel B pulse at the same rate. The
adjustment control controls how fast the pulse rate goes up or down with values from
10 to 100. The second value, is the pulse feel, that allows you to adjust the sensation of
each individual pulse, from soft to spiky, with values from 1 to 100.
Milk Mode
The pulse rate increases and then drops to 0 (continuous). This is similar to Squeeze, but
channels A and B alternate. The adjustment control controls how fact the pulse rate
goes up or down. The adjustment control controls how fast the pulse rate goes up or
down with values from 10 to 100. The second value, is the pulse feel, that allows you to
adjust the sensation of each individual pulse, from soft to spiky, with values from 1 to
100.
17