EAE EE-6603BWF - Installation Attentions

Installation, Operation and Parts Manual
EE-6603BWF
12
4.1.4 Tools and equipment for installation
Tool name
Specification
Qty
Electrical drill
With D16 and D18 drill bit.
1
Open spanner
D17-19mm
2
Adjustable spanner
bigger than D30mm
1
Cross socket screw driver
PH2
1
Quick spanner handle adapter/ Ratchet
1
Socket spanner
D24mm
1
Levelling device
1
Hammer
10 pounds
1
Truck lift
Capacity more than 2500KG
1
Lifting strap
Capacity, 1000KG
2
Lifting strap
Capacity, 2000KG
1
4.1.5 Checking parts
Unfold the package and check if any parts missed as per the following list. Do not hesitate to contact us in case any parts missed, but if
you do not contact us and insist installing upon the lack of some parts, we as well as our dealers will not bear any responsibility for this
and will charge for any parts subsequently demanded by the buyer.
No.
Name
Specification
Qty
1
Power side lifting platform assembly
6603B-01
1
2
Secondary lifting platform assembly
6603B-02
1
3
Control cabinet
6603B
1
4
Rubber pad
38*120*160mm
4
5
Expansion bolt
M16*120
16
6
Air hose
D=8
2m
7
Air hose connector
PP-20 5*8
1
8
User's Manual
1
9
Key
1
10
Oil tank label
1
4.2 Installation attentions
4.2.1 Joints of oil hose and wiring must be firmly connected in order to avoid leakage of oil hose and looseness of electrical wires.
4.2.2 All bolts should be firmly screwed up.
4.2.3 Do not place any vehicle on the lift in the case of trial running.