OPERATION INSTRUCTIONS
5.1 Precautions
5.1.1 Check all the joints of oil hose. Only when there is no leakage, the lift can start work.
5.1.2 The lift, if its safety device malfunctions, shall not be used.
5.1.3 The machine shall not lift or lower an automobile if its center of gravity is not positioned midway of the rising platforms. Otherwise,
the manufacturer as well as the dealers will not bear any responsibility for any consequence resulted thereby.
5.1.4 Operators and other personnel concerned should stand in a safety area during lifting and lowering process.
5.1.5 When platforms rise to the expected height, turn off the power to prevent any wrong operation done by unconcerned people. If
necessary, lock the switch with a padlock.
5.1.6 Make sure the safety lock of the lift is engaged before start working under the vehicle and no people under the vehicle during lifting
and lowering process.
5.2 Control panel descriptions
To Next Page
Loading...