Eagle 2000 B - Weight Scale Error Codes

- 28 -
4.2 Weight Scale - Error Codes
Error
Code
Possible Cause Solution
uuuuuu
 Overloaded condition.
 Wrong connection at load cell.
 Load cell has quality problem.
 Reduce the weight.
 Check load cell connection.
 Inspect load cell for damage.
 Check the input and output.
nnnnnn
 Overloaded condition.
 Bad connections.
 Load cell has quality problem.
 Check scale is resisted or not, foot is kept level
or not.
 Check load cell connection.
 Check input and output resistance of load cell.
ERR1
 Overweight calibration error.
 Incorrect weight input or incorrect
weight on weighing platform.
 Input weight correctly during calibration.
 Place correct weight on weighing platform.
ERR2
 Underweight calibration error.
 Incorrect weight input or incorrect
weight on weighing platform.
 The calibration weights Minimum is 10% of
Max. cap. Recommend 60%-80% of Max.
Capacity.
ERR3
 During calibration, the input signal is
negative.
 Check all connections. Check load cell. If
connections and load cell are okay, PCB needs
replacing.
ERR4
 During calibration, the signal is
unstable.
 After the platform is stable, start calibration.
ERR5
 Circuitry error  Replace the PCB.
ERR6
 System error  Call for Tech Support