Need help?Do you have a question about the Eagle I and is the answer not in the manual?
General| Horsepower | 1/2 HP |
|---|---|
| Max Gate Weight | 600 lbs |
| Drive System | Chain |
| Remote Control | Yes |
| Safety Features | Auto-reverse, obstacle detection |
Instructions detailing the safe and proper installation of gate operators, including guarding and clearances.
Critical safety warnings and procedures to prevent injury or death during gate operation and maintenance.
Defines different classes (I-IV) for residential and commercial vehicular gate operators.
General safety advice and warnings to be followed before starting the installation process.
Guidance on installing positive stops to prevent gate derailment and ensure safe movement limits.
Detailed instructions on how to correctly install the gate chain for proper operation.
Instructions on how to set the feature selector to determine the gate's opening direction.
Details on installing reverse and exit loops for safety and automatic gate operation.
Instructions for setting up and adjusting the two-way adjustable reverse sensor (ERD).
Explanation of the functions of the eight-station feature selector switches for configuration.
Details on configuring the master operator using the feature selector switches.
Guide to setting the feature selector switches for the slave operator.
Explains connections for MAG Lock, Alarm, and 24 VAC Power outputs.
Visual guide showing how various accessories connect to the operator's control board.
Details on Reverse Loop, Phantom Loop, and Exit Loop inputs for vehicle detection.
Explains Key/Keypad, Multi-Function, and Edge Sensor inputs for gate control and safety.
Instructions for setting limit switches to ensure the gate stops at the correct positions.
Procedure for manually releasing the gate in emergency situations using the fire box.
Recommendations for mounting edge sensors for secondary entrapment protection.
To Next Page
