88
may fade until it is unreadable. A low transparency will usually make
menu text easier to read, at the cost of watching your sonar returns.
Experiment with this feature until you find the right level of transpar-
ency for your eyes.
Main Menu with Transparency command selected.
To adjust Menu Transparency level:
Press
MENU|MENU|↓ to TRANSPARENCY|ENT. The TRANSPARENCY slider bar
appears. Press ↑ or ↓ to move the bar. The lower end of the scale makes
the menus opaque; the upper end is maximum transparency. Press
EXIT
to remove the slider bar from the display.
Units of Measure
This menu sets the speed and distance (statute or nautical miles, me-
ters), depth (feet, fathoms, or meters) and temperature (degrees Fahr-
enheit or Celsius). To change the units:
Press
MENU|MENU|↓ to UNITS OF MEASURE|ENT.
To Next Page
Loading...
