Ignition ON, press arm button over 2sec.
Arming status within 5sec., press button again
Ignition ON, press both buttons over 2sec.
1 siren chirp to indicate in standby mode
2 siren chirp to indicate 1st stage sensor bypass
3 siren chirp to indicate 1st stage sensor bypass
Standby Anti Hi-Jack :
Zone-1 sensor bypass:
Valet mode:
Red flashing
when pressing
Response
Response
Response
1 green flash to indicate turn on the mode
1long + 1short chirps given
Red flashing to indicate failed receiving
0.5sec.
0.5sec.
or
Red flashing
when pressing
Response
Press once
Press once
Press twice
1 green flash to indicate arming status
Red flashing to indicate failed receiving
0.5sec.
0.5sec.
or
Car search mode:
Response
Arming status after 5sec., press button again
1 green flash to indicate arming status
Red flashing to indicate failed receiving
0.5sec.
0.5sec.
or
Remote Anti Hi-jack :
Red flashing
when pressing
Response
Ignition ON, press both buttons over 2sec.
+