1-way remote reminder arm/disarm
status to 2-way remote
Press button
4-chirp
Press button
3-chirp
PROGRAMME FEATURES TABLE
Press button
2-chirp
15sec.
3 min.
60sec .
5 min. 10 min.
W/O
PIN
*W/O
Arming
w/en gine
runn ing
*Arm ing
w/en gine
runn ing
* Reverse
warning
w/i ch irp
Reverse
warning
w/o ch irp
Door
lock
AV sw
for 2nd step
disarm
2nd stage
door
unlo ck
Remote
latch ed
Remote
latch ed
Press button
1-chirp
*8sec.
*1 min.
*W/I
*Valet
W/I
*Wind ow
*Turbo
mode
*Trunk
Remo te
latche d
Trunk
Trunk
Dome
Light
Pager
Dome
Light
Turbo
mode
Turbo
mode
21 Red/black wire positive (+) input
13
12 Door switch arming delay
17 CH-5 (yellow/black) feature
18 Turbo mode time
19 Door lock for Turbo mode
16 CH-4 (white/black wire) feature
FEATURES
20 Emergency disarm by Valet SW / PIN
15 CH-3 (gray wire) feature
14
Item
NO:
LED
flash
Press button once, siren will give 1-chirp and in
counting time , lights start flashing ;
1. If press button once, siren will give 2-chirp
for programme time when arming.
1-2. If press button once, siren will give 2-chirp
for programme time by press buttons to activate.
Press button once, siren will give 1-chirp and in
counting time , lights start flashing ;
1. If press button once, siren will give 2-chirp
for programme time when disarming.
1-2. If press button once, siren will give 2-chirp
for programme time by press buttons to activate.
RY-1 On-board relay function select
CO/NO
22
1. Arming output 1~120sec..
1-1. Press button + output 1~120sec.
1. Disarming output 1~120sec..
1-1. Press button + output 1~120sec.
23
CH-6 (-) output function select:
CH-7 (-) output function select:
(Key3+4)
(Key3+4)
(Key3+4)