Eastron SDM630MCT Series - Tariff Information and Specifications Overview; Tariff Information (MT Model); Measured Parameters and Voltage;Current Specs; Power Factor, Frequency, Demand Specs

EASTRON SDM630MCT User Manual
Address: No.1369 Chengnan Road, Jiaxing, Zhejiang, 314001, China.
Tel: 0086-573-83698881/83698882 Fax: 0086-573-83698883 Web: www.eastron.com.cn
- 25
Tariff info
Only SDM630MCT-MT display
1
From the Set-up menu, use
and
buttons to select the tariff info
option.
2-1
Long press to
enter into the
tariff information page.
2-2
Use
and
buttons to
view the detailed tariff settings.
Left picture shows:
NO.03
Tariff 2
Start from: 02:15
press to return to the main set up menu.
Specifications
Measured Parameters
The unit can monitor and display the following parameters of a single phase two wire(1p2w),
Single phase(split-phase) three wire(1p3w), three phase three wire(3p3w) or four phase four
wire(3p4w) supply.
Voltage and Current
Phase to neutral voltages 60 to 304V a.c.
Voltages between phases 60 to 528V a.c.
Percentage total voltage harmonic distortion (THD%) for each phase to N ( not for 3p3w supplies)
Percentage voltage THD% between phases (three phase supplies only)
Current THD% for each phase
Power factor and Frequency and Max. Demand
Frequency in Hz