EAT C-Sharp User Manual

17
6. Starting the motor, changing the speed
Control of the turntable is performed by external control panel. Press button with 33 r.p.m.
to start the turntable. For cgange the speed from 33 r.p.m. to 45 r.p.m., press button with
45 r.p.m.
To swith turntable back to STAND BY mode, please press button Stby.

EAT C-Sharp Specifications

General

Drive Principle	belt drive
Speed variance	±0.1%
Effective arm length	230 mm
Power consumption	5 W
Speeds	33, 45 RPM
Signal to Noise	70 dB
Output	RCA