EAT C-Sharp User Manual

18
7. Technical Specifications EAT C-Sharp
Model
C-Sharp
Modell
Nominal speed
33/45 rpm, driven by microprocessor,
separate control panel, lighted control
buttons
Geschwindigkeiten
Speed Variance
33rpm: ± < 0,08%, 45rpm: ± < 0,09%
Drehzahlabweichung
Signal to noise
S/N Ratio ( mechanical noise): - 40 dB,
Signal to noise (electrical noise): -70dB
Rumpeln
Downforce range
0 - 30 mN
Möglicher Auflagedruck
Supplied counterweights
without additional insert → for cartridge
5 - 9g (125g), with additional insert →
for cartridge 8,5 - 13g (142g)
Mitgeliefertes Gegengewichts
Effective tonearm mass
16,5g
Effektive Masse des Tonarmes
Effective tonearm lenght
254mm
Effektive Länge des tonarmes
Overhang
16mm
Überhang
Power consumption
8,5 W max/ 0,5W stanby
Leistunggsaufnahme
Voltage
Universal swith mode power supply 15V
DC/1,6 A, 90-264 V AC, 47 - 63Hz
Betriebsspannung
Dimensions (W x H x D)
500 x 400 x 115mm without connectors,
500 x 435 x 115mm with connectors in
the rear panel
Masse (B x H x T)
Weight (without box)
13,5kg + 0,5kg Separated control panel
Gewicht (ohne Verpackung)

EAT C-Sharp Specifications

General

Drive Principle	belt drive
Speed variance	±0.1%
Effective arm length	230 mm
Power consumption	5 W
Speeds	33, 45 RPM
Signal to Noise	70 dB
Output	RCA