Need help?Do you have a question about the Eaton 1000H(XL) and is the answer not in the manual?
General| Power Rating | 1000 VA |
|---|---|
| Output Power | 700 W |
| Real Power | 700 W |
| Topology | Line-Interactive |
| Output Voltage Regulation | ± 5% |
| Form Factor | Tower |
| Input Frequency | 50/60 Hz |
| Output Frequency | 50/60 Hz |
| Transfer Time | 2-6 ms |
| Humidity | 0-95% non-condensing |
| Output Voltage | 220/230/240 VAC |
| Battery Type | Sealed lead-acid (SLA) |
| Efficiency | Up to 95% |
| Outlets | 4 |
| Communication | USB |
| Operating Temperature | 0°C to 40°C |
| Certifications | CE |
General guidelines for installing the UPS, including environmental considerations and proper placement.
Instructions for operating the UPS, including disconnection procedures and safety precautions.
Information on maintenance, servicing, and handling faults, emphasizing qualified personnel.
Details inspection, UPS input/output connection, and wiring for specific models.
Guides on turning the UPS on/off and performing functional tests under various power conditions.
Procedures for connecting external batteries to the long backup time ("XL") models.
Lists specific LED indicator combinations and buzzer patterns with their causes and solutions.
Steps for unpacking, checking contents, inspecting for damage, and general installation notes.
Instructions for installation and wiring by professional personnel, including safety precautions.
Details connecting input/output wires, protective earth ground, and connecting loads to the UPS.
Detailed steps for connecting external battery packs, including safety warnings.
Covers general operation, startup, and shutdown procedures for the UPS system.
Step-by-step guide to powering on the UPS with utility power or in battery mode.
To Next Page
