1000 - 2200 VA
User’s Manual
1019297
Revision A
19
4. 1500 and 2200 VA units. Pull the battery out onto a flat, stable surface. Press on the
black tab on the battery cable connector to disconnect the battery. See “Recycling
the Used Battery” on page 20 for proper disposal.
5. Install the new batteries in the reverse order of removal.
6. Reinstall the metal battery cover removed in Step 2. Replace the front panel.
Testing New Batteries
Press and hold the button for three seconds to initiate a self–test. After the test is
finished, the indicator should turn off. If the indicator stays on, check the battery
connections. Call your service representative if the problem persists.
To Previous Page
Loading...
