4.4 USB COM port (optional)
Connect the UPS to the computer using the USB cable.
Enhance your purchase by downloading the configuration tool software using URL : eaton.com/downloads
4.5 Register warranty
Register warranty at https://www.pqproductregistration.eaton.com
5 Operation
5.1 Start-up and normal operation
Check that the indications on the name plate located on the back of the UPS meets to the AC power source and the
true electrical consumption of the total load.
Battery charge
The UPS charges the battery as soon as it is connected to the AC outlet, whether the ON/OFF button is pressedor not. It is
recommended that the UPS be permanently connected to the AC power supply toensure the best possible autonomy.
To Next Page
Loading...
