EasyManua.ls Logo

Eaton 93E - Single Feed; Battery System; Basic System Configurations

Eaton 93E
133 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Eaton 93E UPS 15-80 kVA (380/400/415 V) Installation and Operation Manual
© Eaton Corporation plc 2015. All rights reserved. Revision: 001
Document ID: 614-01975-00
23 (133)
3.2.4 Single feed
The Eaton 93E 15-80 kVA standard models come with dual feed,
requiring a separate feed for both rectifier and bypass input. Single feed
kits are provided with each unit for on-site installation.
3.3 Battery system
Depending on the UPS model, the battery system may be internal or
external. The battery system provides emergency short-term backup
power to safeguard the operation during brownouts, blackouts, and
other commercial power anomalies. The battery system is equipped
with lead-acid batteries.
3.4 Basic system configurations
The following basic UPS system configurations are possible (depending
on the model):
UPS (internal battery).
UPS with an external battery.
UPS with external batteries and accessory cabinets
Up to 4 UPS's can be added in parallel for capacity or redundancy. The
UPS system configuration can be enhanced by adding optional
accessories, such as a remote Emergency Power-off (EPO) control or
MiniSlot communication cards.

Table of Contents

Other manuals for Eaton 93E

Related product manuals