Eaton 9SX 20KPM Series - Page 54

53
7.3.4 UPS Setting
Under the Main Menu page, select Setting to enter the Setting page. This page
requires you to enter the user password by default. If you enter the password
incorrectly for 3 consecutive times within 5 minutes, the LCD will switch back
to the main page. Following this, the Control and Setting will be locked for 5
minutes and will not be able to be operated during this time. The password
protection can be disabled under: Setting → Password.
UPS Setting table：
Sub-
setting
Setting item
Setting content
General
Alarm
[Enabled] [Disable]
Language
[English] [简体中文]
Date/Time
YYYY-MM-DD HH:MM:SS
LCD Brightness
[0-100%]
LCD Saving Mode
[Enabled] [Disable]
Screen Rotation
[Auto Rotate] [Horizontal]
[Vertical]
Input
Site Wiring Fault
[Enabled] [Disable]
Bypass Voltage Lower
Limit
xxx V (≥110V)
Bypass Voltage High Limit
xxx V (≤276V)
Bypass Frequency Range
[5%,10%]
HE Voltage Low Limit
xxx V (≥110V)
HE Voltage High Limit
xxx V (≤276V)
HE requency range
[5%,10%]
Sub-
setting
Setting item
Setting content
Output
UPS Mode
[Line mode]