Eaton Crouse-hinds series - Signal Supply Fuse Location (FCV)

20
INM MTL SUM5 Rev 7
DRAFT - 09 June 2021 DRAFT - 09 June 2021
5.1 Signal Supply Fuse Location (FCV)
This is located on the Commons services card
• A 160mA quick blow glass fuse 5 x 20mm is located on the PSU Card to protect
the signal supply voltage (FCV).
WARNING !
Installation, conguration and maintenance of this annunciator must only
be performed by competant service personnel
WARNING !
Hazardous voltages may exist on the rear panel connections when
connectors are removed. Take care not to touch any exposed parts and
isolate the supply before carrying out any work