L
Luis RyanSep 7, 2025
What to do if the telephone line is disturbed when using Eaton UPS?
- TTiffany JenningsSep 7, 2025
Surge protection on the telephone line may no longer be provided. Check the modem connections.
To Next PageTo Next PageWhat to do if the telephone line is disturbed when using Eaton UPS?
Surge protection on the telephone line may no longer be provided. Check the modem connections.
What to do if AC power is available, but my Eaton Ellipse ECO 800 operates on battery power?
If your Eaton UPS is operating on battery power even when AC power is available, it could be due to circuit breaker 13, located under the UPS, having been tripped by an overload on the UPS output. Disconnect excess equipment and reset the circuit breaker 13 by pressing the corresponding button to resolve this issue.
What to do if the filtered outlets 8 are not supplied with power on my Eaton UPS?
If the filtered outlets 8 on your Eaton UPS are not supplied with power, there are two possible causes: 1. The wall outlet itself may not be supplied with power. Ensure the wall outlet has power. 2. Circuit breaker 13, located under the UPS, has been tripped by an overload on the UPS output. Disconnect excess equipment and reset the circuit breaker 13 by pressing the corresponding button.
General| Topology | Line Interactive |
|---|---|
| Input Voltage | 230V |
| Output Voltage | 230V |
| Communication Ports | USB port |
| Typical Backup Time (Full Load) | 5 minutes |
| Transfer Time | 4-8 ms |
| Humidity | 0-95% non-condensing |
| Warranty | 2 years |
| Power Rating | 500W / 800VA |
| Output Frequency | 50/60 Hz |
| Number of Outlets | 4 |
| Data Line Protection | Tel/Internet |
| Battery Type | Sealed Lead Acid |
| Efficiency | 95% |
| Operating Temperature | 0 to +40°C |
