Eaton Ellipse MAX 600 User Manual

5
MAU-00033 AE
Technical characteristics
Performances tested according to IEC 61643-1 (class 3) standard for 8/20 μs surge wave
600
W Nominal input voltage
W Input frequency
W Voltage/frequency of battery backup
outlets 9 in battery mode
W Total output current for all outlets
W Output current of battery backup outlets 9
W Leakage current
W Input protection
W Transfer time
W Telephone surge protection
W Sealed lead-acid battery
W Automatic battery test
W Average battery life
W Operating temperature
W Storage temperature
W Operating relative humidity
W Operating elevation
W Safety standards
W Electromagnetic compatibility standards
W Warranty
W Dimensions (mm)
W Weigth (Kg)
165V - 285V, adjustable to 150V - 285 or 175V - 285V
50/60 Hz (46 - 70 Hz working range)
230 V ± 7% (50/60 Hz ± 1 Hz) with pseudosinusoidal wave
0.17 mA
10 A resettable circuit breaker
10 ms typical
Tel, ISDN, ADSL, Ethernet
Once a week
4 years typical, depending on number of discharge cycles and
temperature
0 to 35°C
-25°C to +55°C
0 to 85%
0 to 3000 m
IEC 62040-1-1, CE certified
IEC/EN 62040-2
2 years
3.7 A max 6.5 A max
2x12V, 9Ah
W Uoc (common mode / differential mode)
W Up (common mode / differential mode)
W In
W Imax
2.5 kA
8 kA
AC input source protection, Ellipse:
W UPS power
600 VA /
360W
850
2.6 A max
12 V, 7 Ah
1100
850VA /
550 W
1500
1100 VA /
660 W
1500 VA /
900 W
2x12V, 7Ah
10 A max
600
1100
1500
6kV/2kV
1.5kV/1.5kV
310x 82x 301
6
10
10.2
Ellipse MAX:
4.8 A max
2x12V, 7Ah
310x82x410
850
6kV/2kV
1.5kV/1.3kV

Eaton Ellipse MAX 600 Specifications

General

Brand	Eaton
Model	Ellipse MAX 600
Category	UPS
Language	English