Eaton EX RT 7 - Optional Transformer Module; Transformer Module Purpose; Transformer Connection Example

86-86000-01 B01 - Page 8
STEP 4 Input/Output Box and Brackets Installation
Power Module I/O Box Installation
I/O Box Preparation
1. Knockout appropriate circle
for your wire style.
2. Remove the protective plate under the I/O Box and
connet input/output cables. See section 2.7 in
user manual for different input/output configurations.
3. Reinstall the protective plate under I/O Box.
4. Attach the I/O Box to the power module with three screws.
CAUTION: Always connect the earth ground wire first.
1
2
3
OFF
O
Inner circle is for
Metal Coupling
Outer circle is for
Plastic Coupling
Terminal Block Cover
I/O BOX
OFF
O
4
OFF
O
AC Output (to Step-Down
Transformer, if applicable)
AC Input