Need help?Do you have a question about the Eaton Ferrups FX and is the answer not in the manual?
Crucial safety precautions and warnings for UPS and battery installation and operation.
Overview of the Eaton Ferrups FX UPS series features and benefits.
Step-by-step guide for inspecting and unpacking the UPS unit.
Details the functionality and use of the Remote Control Display for UPS monitoring.
Information on external battery cabinets for extending UPS runtime.
Describes types of bypass switches and their models for utility power transfer.
Options for user-replaceable receptacle panels for UPS output connections.
Explains various communication methods and cards for the UPS system.
Guidelines for selecting an appropriate installation site considering environment and ventilation.
Instructions on how to install anchor brackets to secure the UPS unit.
Procedures and requirements for hardwiring the UPS to electrical power.
Specifies correct breaker sizes and wire gauges for electrical connections.
Details on connecting AC input and output power to the UPS terminal block.
How to operate Make-Before-Break and Break-Before-Make bypass switches.
Electrical diagrams for connecting bypass switches to the UPS system.
Safety precautions and preparation steps before installing batteries and cabinets.
Steps for installing and connecting external battery cabinets and batteries.
Introduction to various communication options like relay cards and network cards.
Details on connecting signal inputs/outputs for remote control and alarms.
Explanation of indicator lights and the remote control display.
How to manually select and change UPS operating modes.
Procedure to enter the user-level password for parameter access.
Guide to viewing and modifying UPS operational parameters.
Comprehensive list and descriptions of all programmable UPS parameters.
Adjusting LCD backlight, LED backlight, and lightbar brightness settings.
Instructions for locking and unlocking the control panel keypad.
Step-by-step guide for starting up hardwired UPS units.
Procedures for initial startup of UPS units with a bypass switch.
Configuration of initial parameters like date, time, and battery options.
Information on the UPS's automatic battery discharge test feature.
Procedures for safely shutting down the UPS and its components.
Recommended preventive maintenance checks for reliable operation.
Steps for replacing the UPS receptacle panel.
Guidelines for storing and operating the UPS and batteries in suitable environments.
Information on proper disposal and recycling of batteries and UPS units.
Instructions on how to download and install firmware updates.
How to view stored alarms, events, and status information in the UPS log.
Methods to view and interpret active alarms on the UPS.
Procedures for silencing audible alarms temporarily or permanently.
How the UPS indicates and signals an alarm condition.
Guidance on resolving system-level problems and common issues.
A comprehensive list of typical alarm codes, meanings, and recommended troubleshooting steps.
Contact information and required details for technical support and service.
Detailed electrical input and output specifications of the UPS.
Specifications for operating temperature, humidity, altitude, and safety.
Physical dimensions and weight of the UPS unit.
Specifications for available bypass switch models.
Physical dimensions and weight of external battery cabinets.
Information on battery specifications, types, and runtimes.
Details of the limited warranty coverage for the UPS in the US and Canada.
To Next Page
General