Need help?Do you have a question about the Eaton 9355-F47 Unirom and is the answer not in the manual?
General| Category | UPS |
|---|---|
| Model | 9355-F47 Unirom |
| Manufacturer | Eaton |
| Topology | Double Conversion Online |
| Relative Humidity | 0-95% non-condensing |
| Power Rating | 47 kVA |
| Apparent Power | 47 kVA |
| Input Frequency | 50/60 Hz |
| Output Frequency | 50/60 Hz |
| Communication Interfaces | RS-232, USB |
| Display | LCD |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Safety/Regulatory Approvals | UL, cUL, CE |
| Battery Type | Valve-regulated lead acid (VRLA) |
Describes the Eaton 9355-F47 Unirom UPS as a true online, double-conversion, three-phase system.
Lists unique benefits like pure sine wave output, high power factor, and ABM technology.
Describes optional accessories like the Remote Monitor Panel and Ultracapacitor Module.
Provides critical safety instructions for installation and maintenance, highlighting lethal voltages.
Advises on installing the UPS in a controlled indoor environment, avoiding water and humidity.
Section to fill in emergency contact information for the site.
Identifies potential hazards associated with the UPS, including electrical, toxic, and physical risks.
Details safety features, lockout/tagout procedures, and personal protective equipment requirements.
Describes the location and meaning of various safety labels on the UPS.
Instructions for checking equipment for shipping damage and filing claims.
Specifies weight considerations for floor loading and recommended working space clearances.
Provides step-by-step instructions for safely unloading the UPS from its pallet.
Details the 3-phase power connections and nominal input/output voltages.
Step-by-step guide for hardwiring the UPS, including breaker and grounding requirements.
Provides specifications for terminal block wiring, including wire size, rating, and torque.
Instructions for optional hardwiring of remote EMO terminations.
Steps to stabilize the UPS, including lowering feet and attaching a bracket for anchorage.
Recommendations for floor bolts and embedment for seismic applications.
Critical safety warnings and precautions for handling and installing UPS batteries.
Step-by-step guide for removing old batteries and installing new ones.
Safety warnings and precautions specific to installing ultracapacitor modules.
Step-by-step instructions for installing the ultracapacitor module into the UPS.
Overview of communication ports (DB-9) and bays (X-Slot) for connecting devices.
Details on Remote Monitor Panel (RMP) and Remote Emergency Power-off (REPO) functionality.
Information on Industrial Relay Card, power management software, and control terminals.
Explains the UPS control panel, its graphical LCD, buttons, and status indicators.
Guides through menu navigation, display options, and user-configurable settings.
Procedures for initial startup, UPS startup, normal shutdown, and emergency machine off (EMO).
Guidelines for maintaining UPS cleanliness, optimizing battery life, and proper storage.
Information on battery type, when to replace, and the replacement procedure.
Instructions for proper disposal and recycling of used batteries, ultracapacitors, and UPS units.
Lists UPS models, power ratings, dimensions, and weights.
Details environmental operating conditions, safety conformance, and agency markings.
Outlines technical specifications including input/output voltage, frequency, and overload capabilities.
Provides detailed battery specifications and Material Safety Data Sheet (MSDS) information.
Explains typical UPS alarms, their possible causes, and recommended actions.
Provides contact information for technical support and required details for service calls.
Details the terms, conditions, and limitations of the limited factory warranty.
To Next Page
