Eaton 9355-F47 Unirom - Installing Ultracapacitor Module

ULTRACAPACITOR MODULE INSTALLATION
Eaton 9355-F47 Unirom UPS (10/15 kVA) User's Guide S 164201642 Rev C www.eaton.com/powerquality
49
Installing the Internal Ultracapacitor Module
D A N G E R
Lethal voltage will be present when performing the steps in this section.
To install the internal ultracapacitor module:
1. Verify that the input, output, and battery circuit breakers are in the
OFF position (see Figure 24).
2. Verify that the input and output battery circuit breakers have
appropriate lockout/tagout devices installed.
UPS Battery
Circuit Breaker
Input and Output
Circuit Breakers
Figure 24. UPS Rear View