Need help?Do you have a question about the Eaton 9355 Series and is the answer not in the manual?
General| Frequency | 50/60 Hz |
|---|---|
| Topology | Double-conversion |
| Input Voltage | 208/220/240 V |
| Output Voltage | 208/220/240 V |
| Form Factor | Tower |
| Overload Capability | 125% for 10 minutes, 150% for 1 minute |
| Communication | RS-232, USB |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -15°C to 45°C (5°F to 113°F) |
| Humidity | 0-95% non-condensing |
| Dimensions | Varies depending on model |
| Weight | Varies depending on model |
| Battery Type | Valve-regulated lead acid (VRLA) |
Guide on how to use the manual for installation and operation.
Explains type conventions, icons, and terms used in the manual.
Details symbols used for safety and controls on the UPS.
Provides references to additional resources and contact information for more details.
Information on contacting customer support for assistance and troubleshooting.
Instructions and link for registering the UPS system for warranty and support.
Steps to create a plan for installing the UPS system.
Guidelines for preparing the installation site, including environmental considerations.
Instructions and considerations for preparing power wiring for parallel UPS systems.
Procedures for inspecting the UPS equipment upon arrival and handling shipping damage.
Essential information and warnings before starting UPS installation.
Detailed steps for safely unloading UPS cabinets from shipping pallets.
Wiring instructions for Version 1 parallel tie cabinets.
Wiring instructions for Version 2 parallel tie cabinets.
Information on installing optional components like the CAN Bridge Card.
Step-by-step guide for installing optional Extended Battery Modules (EBMs).
Overview of the UPS control panel, indicators, and buttons.
How to access and change the language settings on the UPS.
Explanation of the LCD display and its functions.
Details on configurable user settings for the UPS.
Procedures for performing initial startup and operational checks on the UPS.
Steps to configure the UPS for optimal runtime with Extended Battery Modules.
Instructions for safely shutting down the entire parallel UPS system.
Procedures for shutting down a single UPS unit within a parallel system.
Steps to restart a parallel UPS system after shutdown.
How to switch the UPS between normal and maintenance bypass modes.
Lists common UPS alarms, their possible causes, and corrective actions.
Procedure for silencing active alarms on the UPS.
Information and link for registering the UPS unit for warranty purposes.
To Next Page
