Eaton 9355 Series - Figure 19. Version 2 Parallel Tie Cabinet Front Door and Cover

26 Eaton 9355 Parallel UPS (10/15 kVA) User's Guide 164201601—Rev E0
Compare the circuit breaker ratings to the ones in Table 4.
NOTE To accommodate the feature of easy system expandability, it is recommended that
initial installation of the Eaton 9355 UPS contain wiring to support the maximum
capacity of the UPS cabinet.
3. Switch off utility power to the distribution point where the parallel tie cabinet and UPSs will be connected.
Be absolutely sure there is no power.
4. Determine your equipment's grounding requirements according to your local electrical code.
5. Unfasten the bypass cabinet front door latch and swing the door open (see Figure 19).
6. Follow the instructions on the inside of the door to open or remove the front cover (see Figure 19 and
Figure 20).
Figure 19. Version 2 Parallel Tie Cabinet Front Door and Cover
Door Latch
Door
Front Cover
UPS System Installation