Eaton 9355 Series - Figure 4. Unloading the Cabinet

16 Eaton 9355 Parallel UPS (10/15 kVA) User's Guide 164201601—Rev E0
Figure 4. Unloading the Cabinet
9. With the cabinet supported, slowly pull the pallet away from the cabinet (see Figure 5).
Figure 5. Removing the Pallet
10. Roll the cabinet to the desired location.
44..22..22 TTwwoo--HHiigghh UUPPSS CCaabbiinneettss
To remove a two-high UPS from the shipping pallet:
1. Remove the M10 bolt securing the vertical bracket to the pallet (see Figure 6).
2. Remove and retain the three M4 screws securing the vertical bracket to the UPS. Remove the vertical
bracket.
UPS System Installation