Eaton 9355 Series - Figure 23. UPS Rear View (3-High Shown)

30 Eaton 9355 Parallel UPS (10/15 kVA) User's Guide 164201601—Rev E0
Figure 23. UPS Rear View (3-High Shown)
Battery Circuit Breaker
UPS Wiring
Access Cover
Conduit Landing Plates
14. Hardwire the UPS input terminations.
See Table 4 for specifications and Figure 24 for a detailed view of the UPS terminal block.
NOTE 1 Input neutral must be wired for proper operation. Failure to connect an input neutral will
void the warranty. If the optional input transformer is installed, an input neutral is not
required.
NOTE 2 The Eaton 9355 UPS is a single-feed UPS only.
UPS System Installation