Eaton 9355 Series - Figure 22. Version 2 Parallel Tie Cabinet Bypass Breaker

Eaton 9355 Parallel UPS (10/15 kVA) User's Guide 164201601—Rev E0 29
Figure 22. Version 2 Parallel Tie Cabinet Bypass Breaker
11. Verify that each UPS battery circuit breaker is in the OFF position (see Figure 23).
12. From each UPS, remove the UPS wiring access cover and one of the conduit landing plates and retain.
13. Punch two holes in the conduit landing plate for the input and output conduit using a Greenlee punch or
similar device.
UPS System Installation