Eaton 9355 Series - 4.3.3 Installing Options

34 Eaton 9355 Parallel UPS (10/15 kVA) User's Guide 164201601—Rev E0
Figure 27. Version 2 Tie Cabinet Bypass AC Input Wiring
Line 1
Line 2
Line 3
21. Verify the phase rotation for each UPS and the bypass input.
22. Reinstall the internal cover removed in Step 7.
23. Reinstall the parallel tie cabinet front cover removed in Step 5.
24. Proceed to paragraph 4.3.3 Installing Options to continue the installation process.
44..33..33 IInnssttaalllliinngg OOppttiioonnss
This section describes the Powerware Hot Sync CAN Bridge Card.
For other options, such as additional X-Slot cards, LanSafe Power Management Software, remote emergency
power-off (REPO), relay output contacts, or programmable signal inputs, refer to the Eaton 9355 UPS (10/
15 kVA) User's Guide.
Figure 28 shows the location of the communication options and control terminals on the UPS.
UPS System Installation