Eaton 9355-F47 Unirom - Installing Communication Options and Control Terminals

COMMUNICATION
Eaton 9355-F47 Unirom UPS (10/15 kVA) User's Guide S 164201642 Rev C www.eaton.com/powerquality
56
Installing Communication Options and Control Terminals
To access and install the communication options and control terminals:
1. Remove the front covers of all cabinets, starting with the top
cabinet.
Press and release the handle latch at the bottom of each cover and
then lift the cover up and off the cabinet (see Figure 29).
Figure 29. Removing the Front Covers
2. Install the appropriate X-Slot card and/or necessary cable(s) into the
top cabinet (see Figure 28 and Figure 30).