Eaton 9355-F47 Unirom - Communication Options and Setup

Eaton 9355-F47 Unirom UPS (10/15 kVA) User's Guide S 164201642 Rev C www.eaton.com/powerquality
55
Chapter 9 Communication
This section describes the:
S DB-9 communication port
S X-Slot cards
S Remote Monitor Panel and Industrial Relay Card (IRC)
S Power management software
S Remote emergency power-off (REPO)
S Relay output contacts
S Programmable signal inputs
Figure 28 shows the location of the communication options and control
terminals on the UPS.
1
2
1
2
1
2
1
2
1
2
3
DB-9 Communication Port
REPO (normally closed)
REPO (normally open)
Signal Input 2
Signal Input 1
X-Slot Communication Bay #2
X-Slot Communication Bay #1
Relay Output Contacts
Figure 28. Communication Options and Control Terminals