Eaton 9355-F47 Unirom - Technical Performance Specs

SPECIFICATIONS
Eaton 9355-F47 Unirom UPS (10/15 kVA) User's Guide S 164201642 Rev C www.eaton.com/powerquality
97
Table 14. Technical Specifications
Technology Online, double‐conversion topology with static bypass switch and
3‐position maintenance bypass switch.
Frequency independent operation.
Input Voltage Range 130–249 Vac per phase
Input Power Factor >0.99 at full load nominal line conditions
Input Rated Voltage 120/208 Vac three-phase
Input Frequency Range 45–65 Hz
Input Rated Frequency 50/60-Hz selectable, auto‐configuring
Output Voltage Regulation ±1% static, Phase to Neutral
±2% static, Phase to Phase
±5% dynamic at 100% resistive load change
Response time <1 ms
Output Voltage Distortion <2% THD linear load, <5% THD non‐linear load
Output Frequency 50/60-Hz selectable or auto‐configuring
Output Frequency Regulation Synchronization to line
Output Overload 101–110% for 10 minutes
111–125% for 60 seconds
126–149% for 5 seconds
>150% for 300 milliseconds