Eaton i-on Installation Guide

i-on30EX/EXD Technical Specification
Page 37
Compliance Statements
The i-on30EX and i-on30EXD are compliant with
EN50130-5 environmental class II.
The i-on30EX and i-on30EXD are suitable for use
in systems designed to comply with PD 6662:
2010 at grade 2.
When fitted with radio devices the i-on30EX and i-
on30EXD are capable of compliance with
EN50131 at Grade 2.
The built in communicator in the i-on30EXD is
compliant with EN50136-1 as an ATS2
communicator.
At Grade 2 the built in communicator provides a
compliant communicator for the i-on30EXD
provided that:
a) It is connected in accordance with the
installation instructions.
b) The connected PSTN is functioning normally.
When using its built in communicator this product
provides options A, B and C at Grade 2 as noted
in Table 10 of EN50131-1:2006+A1:2009.
If the installer selects a non-compliant
configuration then they must remove or adjust
compliance labelling
Third party testing carried out by Anpi.
Compatible Equipment
HUD
705rEUR-00 Two button HUD (single
channel, top button is
disabled)
706rEUR-00 Two button HUD/tilt switch
transmitter
710rEUR-00 Two button HUD
726rEUR-50 Long range hand held HUD
726rEUR-60 Short range hand held HUD
Detectors
713rEUR-00 Pet tolerant PIR
714rEUR-00 PIR Transmitter (Small case)
720rEUR-00 Smoke Detector Transmitter
734rEUR-00/01 CC/FSL Door Contact
Transmitter (white)
734rEUR-05/06 CC/FSL Door Contact
Transmitter (brown)
738rEUR-00/04 Spyder shock sensor
(white/brown)
739rEUR-50 Sentrol glass break detector
DET-RDCS Combined door contact
shock sensor transmitter
xcelr Radio PIR
xcelrpt Pet tolerant radio PIR
xcelw Wired PIR
xcelwpt Pet tolerant wired PIR
Sounders
760ES External Wireless sounder
9040UK-00 Speaker boxed
Setting / Unsetting – Keypads
i-rk01 Radio Keypad
i-kp01 Keypad (with internal prox
reader, but without zones or
external prox reader)
KEY-EP External prox reader for
KEY-KPZ01/KP01
KEY-K01 keypad
KEY-KP01 keypad with internal prox
reader and terminals for
external prox reader
KEY-KPZ01 keypad, with internal prox
reader, two zones, one
output and terminals for
external prox reader
Setting / Unsetting - Fobs
FOB-2W-4B Two-way keyfob
i-fb01 Four button remote control
727rEUR-00 Four button remote control
with encrypted code (HUD
function not compatible with
BS8243 or DD243)
Communicators
i-dig02 PSTN Communication (ARC
only).
i-gsm02 GSM communications
module
i-sd02 PSTN Communication
module with speech dialling
Accessories
703rEUR-00 4-channel (2 zone)
transmitter
762rEUR-00 Two Channel Receiver
768rEUR-50 Eight Channel Receiver
770rEUR-00 Wireless Accessory Module
771rEUR-00 Info Module
i-rc01 Relay Card

Eaton i-on Specifications

General

Brand	Eaton
Model	i-on
Category	Security System
Language	English