System Options Menu
Page 94
Disabled
The user can unset a part-set system or partition using a remote control without first
starting the entry timer.
RKP Needs Entry
This option relates to the use of one-way radio keypads when unsetting a full-set system
or full-set partition.
Enabled
The user must first trigger a Final Exit zone and start the entry timer before unsetting
the system (or partition) with a radio keypad. The system unsets those partitions the
user is assigned to that have an active entry timer. If a partition that the user is
assigned to does not have an active entry timer, the partition remains set.
Disabled
The user can unset the system using a radio keypad without first starting the entry
timer. The system unsets all partitions that the user is assigned to.
RKP Entry PrtSt
This option relates to the use of one-way radio keypads when unsetting a part-set system
or part-set partition.
Enabled
The user must first trigger a Final Exit zone and start the entry timer before unsetting
a part-set system or partition with a radio keypad. The system unsets those partitions
the user is assigned to that have an active entry timer. If a partition that the user is
assigned to does not have an active entry timer, the partition remains part set.
Disabled
The user can unset a part-set system or partition using a radio keypad without first
starting the entry timer. The system unsets all partitions that the user is assigned to.
HUA Response
This option is available only for part-setting systems. In a partitioned system, each partition
can have its own HUA response. See page 74 for a description of this option.
PZ Unset Response
This option is available only for part-setting systems. See page 75 for a description of this
option.
PZ Unset Response
This option is available only for part-setting systems. See page 75 for a description of this
option.
PZ Reset time
This option is available only for part-setting systems. See page 76 for a description of this
option.
To Next Page
Loading...
