Eaton i-on40H - Page 46

Installer Menu Map
Page 36
Warning Tone
Audible
Delete Event
Add Exception
Exception 01...
Exception Start
Time
00:00
Exception Start
Date
01/01
Exception End
Time
00:00
Exception End
Date
01/01
Edit Exception
Exception 01...
Name
"Exception nn"
Start
00:00, 01/01
End
00:00, 01/01
Delete Exception
4 System Options
Wired Zone
Type
Panel Zones
2 Wire FSL 2k2/4k7
Visible only if the control unit supports
wired zones.
All Zones
2 Wire FSL 2k2/4k7
Visible only if a device connected to the
bus supports wired zones.
User Access
HUA keys active
No
Quick set
No
Quick omit
No
User code reqd
Yes
2 Way Replies
Yes
Used for FOB-2W-4B.
2W Set Instant
Yes
Used for FOB-2W-4B.
Duress Enable
No
Terminated Set
Yes
Used for KEY-EP.
User Reset
Zone alarms
Yes
Visible only if Confirmation Mode is
”Basic”.
Zone tampers
Grade 2: Yes
System tampers
No
Confirmation
Confirmation Mode
DD243
Not available for EU control units,
which use Basic Confirmation.
BS8243
Default for UK systems
Basic
Confirmation time
30 minutes
Visible for BS8243 or DD243.
After Entry
1 zones
Visible for BS8243 or DD243. Default
changes to 2 zones when Confirmation
Mode = DD243.
Entry Keypad Lock
Off
Visible for BS8243 or DD243.
Sounder on
Unconfirmed
Siren on
Unconfirmed
Unconfirmed reset
User
Visible for BS8243 or DD243.
Confirmed reset
Installer
Visible for BS8243 or DD243.
HUA Confirm time
8 hours
Visible for BS8243 only.
Tamp as Tamp-Only
Enabled
Visible for BS8243 only.
Masking
Grade 2: Off
Mask Override
On
Visible only when Masking is On.
Language
English
Shunt Groups
Shunt Group 1...
Restore
Defaults
Staged defaults
User
Zones
Radio Devices
Outputs
Setting Info
System Options
Communications
Factory defaults
Installer Name
“Installer”