Eaton i-onEX Series - Page 98

4. Administration i-on40 & i-onEX Range
Page 92
you can apply to the selected
button.
The setting options available are:
Part Set All Part Sets All Partitions that the user belongs to.
Partitions You can choose to Part Set or Full Set any partitions
that the user belongs to.
Full Set All Full set all the partitions that the user belongs to.
The unsetting options available are:
Unset All Unset all partitions that the user belongs to.
Unset Partitions You can choose to unset any of the partitions that
the user belongs to.
Note: Ask your Installer if the entry timer needs to be running before a
user can unset using a remote.
11. Choose what setting (or unsetting) option that you wish to
apply, as follows:
a) Press  or . until the bottom
line of the display shows the
option you want.


b) Press .
The keypad gives a double “beep”
confirmation tone. The keypad
display shows:


If you selected “Partitions” in step 10c)
the display shows:


c) Press  or  to select the
user’s partition that you want to
change.


d) Press  to select between
“No”, “Full” or “Part”.
“No” = No effect.
“Full” = Full Set
“Part” = Part Set

