Eaton Moeller ZEV Series - Removing devices; Connecting cable

Mounting the devices
23
11/01 AWB2300-1433GB
ZEV-XSW-820 strapped to a current busbar with cable
ties
Figure 15: Removal of the strap
X
Release the lock pins.
X
Remove the lock pins.
X
Remove the strap.
Figure 16: Installation o the cable ties and wiring of the sensor
cables
X
Wrap the cable tie around the current sensor and the
busbar.
X
Install the sensor cable so that each one is wound only
around one busbar.
1
2
1
2
3
1
2
3