Eaton Moeller ZEV Series - Operating the devices; Settings

Installation
24
11/01 AWB2300-1433GB
ZEV-XSW-820 strapped to a > 50 mm
2
power cable
Figure 17: Mounting on power cable
X
Place the strap around the busbar.
X
Engage the lock pin.
X
Fasten the strap.
Figure 18: Installation of the sensor cables
X
Install the sensor cable so that each one is looped around
one busbar only.
h
hh
h
Use additional cable ties at temperatures > 50 °C.