IM02602002E
www.eaton.com Page 4-15
MP-3000
SUB-
MENU
LINE # DISPLAY HELP MESSAGE SETTING RANGE/VALUE
VALUE SELECTED
4 AX1 ENER
or
AX1 DENR
AX1 ENER - ENERGIZE AUXILIARY
RELAY 1
AX1 DENR - DE-ENERGIZE AUXILIARY
RELAY 1
Toggles between AX1 ENER and AX1 DENR
Press and hold Reset button to perform
selected test
5 AX2 ENER
or
AX2 DENR
AX2 ENER - ENERGIZE AUXILIARY
RELAY 2
AX2 DENR - DE-ENERGIZE AUXILIARY
RELAY 2
Toggles between AX2 ENER and AX2 DENR
Press and hold Reset button to perform
selected test
6 Choose:
AOUT 4
AOUT 12
or
AOUT 20
FORCE ANALOG OUTPUT
4 - FORCE A 4 MA OUTPUT
12 - FORCE A 12 MA OUTPUT
20 - FORCE A 20 MA OUTPUT
Toggle between AOUT 4, AOUT 12, and AOUT 20
Press and hold Reset button to output forced
value
7 DI 1 OFF
or
DI 1 ON
STATE OF DISCRETE INPUT 1
Read only
8 DI 2 OFF
or
DI 2 ON
STATE OF DISCRETE INPUT 2
Read only
1 MTR RST
or
PUSH RST
MTR RST - PUSH RAISE TO ENABLE
MOTOR HISTORY RESET
PUSH RST - PUSH RESET TO EXECUTE
RESET OF MOTOR HISTORY OR PUSH
RAISE TO NOT RESET
Change to PUSH RST and press Reset button,
or return to MTR RST
2 TRIP RST
or
PUSH RST
TRIP RST - PUSH RAISE TO ENABLE
TRIP HISTORY RESET
PUSH RST - PUSH RESET TO EXECUTE
RESET OF TRIP HISTORY OR PUSH
RAISE TO NOT RESET
Change to PUSH RST and press Reset
button, or return to TRIP RST
3 ALRM RST
or
PUSH RST
ALRM RST - PUSH RAISE TO ENABLE
ALARM HISTORY RESET
PUSH RST - PUSH RESET TO
EXECUTE RESET OF ALARM HISTORY
OR PUSH RAISE TO NOT RESET
Change to PUSH RST and press Reset button,
or return to ALRM RST
4 TOT RST
or
PUSH RST
TOT RST - PUSH RAISE TO ENABLE
TOTAL HISTORY RESET
PUSH RST - PUSH RESET TO EXECUTE
RESET OF TOTAL HISTORY OR PUSH
RAISE TO NOT RESET
Change to PUSH RST and press Reset button,
or return to TOT RST
1 232 XXX RS232 COMMUNICATION - ON OR OFF Select RS-232 communications either on or
To Next Page
Loading...
