Eaton MX 4000 RT - 3. Operation: Operating Modes; 3.3 Operating Modes

34008030EN/AD - Page 22
3. Operation
3.3 Operating modes
Normal mode
Eco mode
This is the standard operating mode, set
by default in the factory.
Under normal condition (Normal AC
source available):
LED (20) is ON.
LEDs (30), (32), (34) are green.
The equipments are protected by the
UPS.
The main advantage of the Eco mode (see
glossary) is that it reduces the
consumption of electrical power.
Under normal condition (Normal AC
source available):
LED (20) is ON.
LEDs (32), (34) are green.
The equipments are supplied in ECO
mode.
If normal AC source is out of tolerance:
LEDs (20), (21) are ON.
LEDs (30), (32), (34) are green.
The equipments are protected by the
UPS.
ESC
IO
343230
20
ESC
IO
3432
20
ESC
IO
343230
20 21