Power Xpert
®
UX with W-VACi circuit breaker 6063308 G01 01 14 July 2011 www.eaton.com
4 System operation
This chapter contains the operating procedures for Circuit
breaker units used in Eaton Power Xpert
®
UX switchgear
Refer to insert the W-VACi Operations and Maintenance
Manual part of the technical documentation.
Interlocks must only be removed by a specialist,
and only if absolutely necessary for operational
reasons. When removing an interlock, the
specialist must take special and adequate safety
measures to prevent situations, which might
have fatal consequences.
The switchgear must be operated only as prescribed
in this manual. Actions, which are not prescribed, or
actions prescribed in unusual circumstances, must
be taken only with the approval of the responsible
Eaton specialist. The latter’s instructions must be
followed exactly.
Only qualified experts and qualified operating
specialists may operate the equipment. No other
personnel must be present in the operating area.
4.1 Operation - General
This chapter describes operating actions relating to
standard equipment. The operation of optional equipment
and accessories is included in the operating instructions.
These can be found in the information pack, which
includes this manual.
Refer to individual Operations and Maintenance Manuals
for specific equipment.
To Next Page
Loading...
