Powerware 9125 (2500–3000 VA) Seismic Kit
8
Powerware
®
9125 (2500–3000 VA) Seismic Kit Installation Instructions S Rev A www.powerware.com
5. Attach the cabinet to the tab on the back strap by installing one
of the supplied M4 ´ 10 Phillips hex-head screws (see Figure 8).
Figure 8. Securing the Cabinet to the Back Strap
6. Fasten the top of the cabinet to the front strap with two of the
supplied M4 ´ 8 Phillips hex-head screws.
Figure 9. Securing the Front Strap
To Next Page
Loading...
