Eaton Powerware 9910-E64 - Page 26

www.powerware.com/ibm +44 (0) 845 177 3410
25
What’s Included with the E33 UPS
• 2700W/3000 VA, 208–240V UPS
• E33 Accessory Kit (IBM Part Number 42R8066)
• Powerware 5125 (2500–3000 VA) UPS User’s Guide
• Powerware 5125 (9910 E33) Installation Guide for IBM Applications
• (4) IEC-320-C13 to IEC-320-C14, 10A Equipment Power Cords (6 ft/1.8m)
• (1) IEC-320-C19 to IEC-320-C20, 16A Equipment Power Cord (14.8ft/4.5m)
• (1) IBM PDU (FC types supported: #7188, #9188, #5889 or #7109) to IEC-320-C20 [formerly FC 2974]
Power Cord (6ft/1.8m)
• Powerware Software Suite CD
• Serial Cable, DB-9 to DB-9 (6 ft/1.8m)
• Bag of Cord Retention Clips
• Mounting handle and screws
• Rail hardware kit
E33 Options Matrix
Various options are available depending on application. For System i or System p applications,
consult chart below to select appropriate feature codes to order with the E33 UPS.
Description
IBM Feature
Code
IBM Part
Number
POWER
(AIX, Linux),
System p Rack
Worldwide
POWER (IBM i),
System i Rack
Worldwide
ConnectUPS-X Web/SNMP Card 2934
1
39J4824 Yes No
X-Slot Relay/Serial Card Kit 2939
1
42R4332 No Yes
Extended Battery Module (EBM)
(up to 4 EBMs)
6643 42R8067 Yes Yes
1. Maximum one FC 2934 or 2939 per E33 UPS. ConnectUPS-X Web/SNMP Card required if implementing Logical Partitions (LPARs)
on POWER Systems (AIX or Linux), p5 or System p.
E33 Line Cord Options
Feature Code Description
9866 C19 to CEE 7 VII (16 Amp)
9867 C19 to SABS 164 (16 Amp)
9868 C19 to CEI 23-16 (16 Amp)
9871 C19 to IEC-309 P+N+G (16 Amp)
9872 C19 to SII 32-1971 (16 Amp)
9874 C19 to SAA-AS 3112 (16 Amp)
9875 C19 to IEC 60083-A5 (16 Amp)