Eaton Powerware 9910-E64 - Powerware 9910-E65

Powerware Power Protection Handbook for IBM 9910 International System i and System p Applications
30
Powerware 9910-E65
4500 Watt/5000 VA, 208-240 Vac UPS
Features and Benefits
• High power, low profile design ideal for dense i5, p5,
System i, System p and Power configurations
• Supports multiple PDUs (1–3 PDUs in a non-redundant power configuration and
2–6 PDUs in a dual-redundant power configuration)
• Maximizes 32A 1-phase input (mains) power connection capacity by providing 4500
watts of output power
• Single SKU supports System i and System p
• Optional interface/communication cards expand control of application
• Tested and approved by IBM to assure out-of-box usability
• Includes premium IBM warranty
E65 Model Guide
1
Model
Number
IBM Number
Power Out
(Watts/VA)
Input
Connection
2
Output
Connections
Dimensions
(HxWxD, in/mm)
Unit
Weight
(lb/kg)
3
208-240 Vac; 50/60 Hz auto-sensing
9910-E65
1
42R8077 4500/5000 L6-30P
(1) L6-30R,
(4) IEC-320-C13,
(4) IEC-320-C19
5.25 x 17.5 x 26/
133.5 x 444 x 660
161/67
Extended Battery Module (EBM)
9910-6645 42R8075 — — —
5.25 x 17.5 x 24.75/
133.5 x 444 x 620
169/76
1. Base configuration for the E65 consists of the E65 Accessory Kit (IBM p/n 42R8078) and two UPS Internal Battery Trays
(IBM p/n 39J2536). 2. Input power cord is 1.5ft/0.5 m. Requires input power cord supplied by IBM. Types vary. See Line Cord
Options table. 3. Weight includes batteries.
E65 Battery Runtimes Chart (in Minutes)
Load in Watts UPS Internal Batteries +1 EBM +2 EBMs +3 EBMs +4 EBMs
900 59
169
303 452 612
1800 26
79 138
204 274
2250
19
61 106
156 210
2700
15
49 85
125 168
3150
13
43 73
110 142
4050
8
27 52
76 89
4500
7
24 46
67 80
Note: This guide provides typical application information. Battery times are approximate and may vary with equipment,
configuration, disk access, battery age, temperature, etc.