Eaton Powerware 9910-E64 - Page 30

www.powerware.com/ibm +44 (0) 845 177 3410
29
E64 Applications Matrix
Various options are available depending on application. For System i or System p applications,
consult chart below to select appropriate feature codes to order with the E64 UPS.
Description
IBM
Feature
Code
IBM Part
Number
POWER
(IBM i),
System i
Tower
IEC
POWER
(IBM i),
System i
Tower
NEMA
POWER
(AIX,
Linux),
System p
Tower
IEC
POWER
(AIX,
Linux),
System p
Tower
NEMA
POWER
(AIX,
Linux),
System p
Rack WW
POWER
(IBM i),
System i
Rack WW
NEMA PowerPass Distribution
Module
6571 42R4318 No Yes No Yes No No
IEC PowerPass Distribution
Module
6572
3
42R4319 Yes No Yes No No No
#7188, #9188, #5889 or #7109
PDU to UPS power cord 14-feet of
4-feet (respectively)
2972 or
2973
25R2555 or
42R4331
No No No No Yes Yes
UPS Input Power Cord Varies Varies Yes Yes Yes Yes Yes Yes
Options
ConnectUPS-X Web/SNMP Card 2934
1
39J4824 No No Yes Yes Yes
2
No
X-Slot Relay/Serial Card Kit 2939
1
42R4332 Yes Yes No No No Yes
Extended Battery Module (EBM)
(up to 4 EBMs)
6645 42R8075 Yes Yes Yes Yes Yes Yes
EBM Accessory Kit (1 per FC
6645)
— 42R8076 Yes Yes Yes Yes Yes Yes
1. Maximum one FC 2934 or 2939 per E64 UPS. 2. ConnectUPS-X Web/SNMP Card required if implementing Logical Partitions (LPARs) on POWER Systems
(AIX or Linux), p5 or System p. 3. Used with 6572 EMA Power Cord Kit consists of two IEC-320-C13 to NEMA 5-15P power cords (6 ft/1.8m), four IEC-320-C13 to
NEMA 6-15P power cords (6 ft/1.8m), and two IEC-320-C19 to NEMA 6-20P power cords (14 ft/4.4m).