Eaton Powerware 9910-E64 - Page 33

Powerware Power Protection Handbook for IBM 9910 International System i and System p Applications
32
What’s Included with the E65 UPS
• 4500W/5000 VA, 208–240V UPS
• (2) Battery Trays (IBM Part Number 39J4828)
• Accessory kit (IBM Part Number 42R8078) consisting of
- UPS Front Panel (Bezel) Black
- Powerware 5125 (5000/6000 VA) User’s Guide
- Powerware 5125 (9910 E65) Installation Guide for IBM Applications
- UPS Safety Manual
- Powerware Software Suite CD
- Serial Cable, RJ-45 to DB-9 (6 ft/1.8m)
- Serial Cable, DB-9 to DB-9 (12 ft/3.6m)
- Rail Hardware Kit
- REPO Connector Plug 10A, 2-pin
E65 Options
Various options are available depending on application. For System i or System p applications,
consult chart below to select appropriate feature codes to order with the E65 UPS.
Description
IBM Feature
Code
IBM Part
Number
POWER
(AIX, Linux),
System p
Rack
Worldwide
POWER
(IBM i),
System i
Rack
Worldwide
Rack Mounting Bracket Kit — 42R4322 Yes Yes
ConnectUPS-X Web/SNMP Card 2934
1
39J4824 Yes No
X-Slot Relay/Serial Card Kit 2939
1
42R4332 No Yes
#7188, #9188, #5889 or #7109 PDU to UPS
power cord 14-feet or 4-feet (respectively)
2972 or 2973
25R2555 or
42R4331
Yes Yes
UPS Input Power Cord
2
Varies Varies Yes Yes
Extended Battery Module (EBM)
(up to 4 EBMs)
6645
3
42R8075 Yes Yes
EBM Accessory Kit (1 per FC 6645) - 42R8076 Yes Yes
PDU to UPS Power Cord 2974
3
42R4333 Yes Yes
1. Maximum one FC 2934 or 2939 per E65 UPS. 2. UPS input power cord varies according to country requirements. 3. Used to connect
a 7188/9188/5889/7109 PDU to the C19 outlet.
E65 Line Cord Options
Feature Code Description
1424
L6-30R to IEC-309 P+N+G (32 Amp)
1426
L6-30R to PDL Australia (30 Amp)
1427
L6-30R to PDL New Zealand (30 Amp)